Disclaimer

Last Updated: 6 July 2025

1. PRELIMINARY NOTICE

The following Disclaimer (“Disclaimer”) governs your access to and use of the website located at https://elegooslicer.com/, including any sub‑domains, linked pages, features, or content (collectively, the “Site”). Please read this Disclaimer carefully before using the Site. By accessing or using the Site, you acknowledge that you have read, understood, and agree to be bound by this Disclaimer in its entirety. If you do not agree with any part of this Disclaimer, you must discontinue all access to and use of the Site immediately.

2. STATUS OF THE SITE — FAN‑MADE & UNOFFICIAL

  1. Independent, Fan‑Made Resource. Elegoo Slicer is an informational and fan‑curated resource created by technology enthusiasts for the benefit of the global 3‑D printing community. It is not an official publication, service, or property of ELEGOO Inc., its parents, subsidiaries, affiliates, or licensors (collectively, “ELEGOO”).
  2. No Affiliation or Endorsement. The Site has no formal affiliation, partnership, sponsorship, or endorsement from or with ELEGOO. All references to ELEGOO products, trademarks, service marks, or other intellectual property are employed strictly for descriptive and nominative purposes to facilitate user understanding.
  3. No Representation of Official Views. All opinions, analyses, or recommendations expressed on the Site reflect the personal perspectives of the Site’s maintainers and contributors and do not purport to represent the views, policies, or positions of ELEGOO or any other entity.

3. CONTENT SCOPE & HOSTING POLICY

  1. Reference‑Only Information. The Site provides technical write‑ups, troubleshooting notes, firmware‑compatibility matrices, and other descriptive content strictly for reference and educational purposes.
  2. No File Hosting or Distribution. The Site does not host, mirror, cache, or otherwise distribute software binaries, executables, firmware images, or other digital artifacts. All download hyperlinks referenced on the Site resolve exclusively to the official ELEGOO GitHub repositories or other ELEGOO‑controlled domains (the “Official Sources”), untouched and unmodified.
  3. Integrity of Source Material. The Site’s maintainers exercise commercially reasonable efforts to ensure that any deep links point only to files that are publicly available at the Official Sources and are presented in the exact form as provided by ELEGOO, without alteration, repackaging, or reverse engineering.
  4. No Circumvention of Access Controls. The Site does not provide, and expressly disclaims any intent to provide, tools, instructions, or encouragement designed to defeat or circumvent any technical protection measures that govern or restrict access to the Official Sources.

4. INTELLECTUAL‑PROPERTY RESPECT & COPYRIGHT POLICY

  1. No Ownership Claim. The Site claims no ownership over the software, firmware, trademarks, documentation, or other intellectual property belonging to ELEGOO or to any third party. All proprietary rights remain exclusively with their respective owners.
  2. Nominative Fair Use. Any use of ELEGOO’s name or trademarks is made under the principles of nominative fair use for the limited purpose of accurately identifying ELEGOO’s products so that end users may locate the corresponding official resources.
  3. Educational & Non‑Commercial Context. All materials and discussions hosted on the Site serve an educational, archival, and community‑support function; the Site operates on a non‑commercial basis and does not charge fees, sell advertising, or solicit donations in exchange for preferential placement of content.
  4. DMCA / Takedown Procedure. The Site respects intellectual property rights and complies with the notice‑and‑takedown provisions of the Digital Millennium Copyright Act of 1998 (17 U.S.C. § 512) and analogous international regimes. If you believe content accessible via the Site infringes a copyright you own or control, please submit a written notice containing the information required by 17 U.S.C. § 512(c)(3) to the Designated Agent identified in Section 12 below. Upon receipt of a compliant notice, the Site will expeditiously remove or disable access to the allegedly infringing material and will, where applicable, notify the user responsible.

5. NO WARRANTIES — INFORMATIONAL PURPOSES ONLY

  1. “As Is” Basis. The Site, including all content, text, graphics, links, and other items provided thereon, is offered strictly “AS IS,” “WITH ALL FAULTS,” and “AS AVAILABLE,” without warranty of any kind, whether express, implied, statutory, or otherwise.
  2. Disclaimer of Implied Warranties. To the maximum extent permitted by applicable law, the Site expressly disclaims all implied warranties, including but not limited to warranties of merchantability, fitness for a particular purpose, title, quiet enjoyment, and non‑infringement.
  3. Accuracy & Completeness. While the Site endeavors to relay accurate, up‑to‑date information, no guarantee or representation is made regarding the completeness, accuracy, reliability, suitability, or availability of any information. Users should independently verify any data prior to relying upon it.
  4. Third‑Party Links. The Site may contain hyperlinks to third‑party websites (including the Official Sources). Such links are provided solely for convenience. No responsibility is assumed for the content, privacy policies, or practices of any third‑party site.

6. USER RESPONSIBILITIES & ASSUMPTION OF RISK

  1. Technical Proficiency Required. Installing, flashing, or otherwise interacting with firmware, slicer software, or hardware configurations requires a meaningful level of technical competence. Users proceed at their own risk and bear full responsibility for the correct application of any instructions or files retrieved via the Official Sources.
  2. System Damage & Data Loss. The Site shall not be liable for, and hereby expressly disclaims, any and all responsibility or liability for damage to hardware, software, data, or other property arising from or related to a user’s decision to download, install, compile, or execute any software referenced on the Site.
  3. Compliance With Applicable Law. Users are solely responsible for ensuring that their usage of any software complies with all applicable laws, regulations, license agreements, and export‑control restrictions.

7. LIMITATION OF LIABILITY

  1. Exclusion of Certain Damages. To the fullest extent permitted by law, in no event shall the Site, its administrators, maintainers, contributors, or hosting providers (collectively, “Site Parties”) be liable for any indirect, incidental, special, consequential, punitive, or exemplary damages, including but not limited to loss of profits, revenue, goodwill, use, data, or other intangible losses, arising out of or in connection with your use of—or inability to use—the Site.
  2. Cap on Direct Damages. Without prejudice to the foregoing exclusion, the aggregate liability of the Site Parties for any direct damages stemming from your use of the Site shall not exceed one (1) U.S. dollar (or the minimum amount permitted by law, if greater).
  3. Jurisdiction‑Specific Limitations. Some jurisdictions do not allow the exclusion of certain warranties or the limitation/exclusion of liability for incidental or consequential damages. In such jurisdictions, the above limitation may apply to you only to the extent permitted by law.

8. INDEMNIFICATION

You agree to defend, indemnify, and hold harmless the Site Parties from and against any and all claims, liabilities, damages, losses, costs, and expenses (including reasonable attorneys’ fees) arising out of or relating to: (a) your use of, or activities in connection with, the Site; (b) any violation of this Disclaimer by you; or (c) any allegation that any information or material you submit or transmit through the Site infringes, misappropriates, or otherwise violates the intellectual property, privacy, or other rights of any third party.

9. RESERVATION OF RIGHTS & CONTENT MODIFICATION

The Site reserves the right, at any time and without prior notice, to modify, suspend, or discontinue (temporarily or permanently) any portion of the Site, including this Disclaimer. Continued use of the Site after any such modifications constitutes acceptance of the amended Disclaimer.

10. GOVERNING LAW & VENUE

This Disclaimer and any dispute arising hereunder shall be governed by and construed in accordance with the laws applicable in your jurisdiction without regard to its conflict‑of‑law provisions. You expressly consent to the exclusive jurisdiction and venue of the competent courts located in your jurisdiction for the adjudication of any dispute arising in connection with this Disclaimer or the Site. Nothing herein shall be construed as a choice‑of‑law clause favoring any specific forum; instead, the governing law shall be that which otherwise applies under the principles of private international law.

11. SEVERABILITY

If any provision of this Disclaimer is held to be invalid, unlawful, or unenforceable by a court of competent jurisdiction, such provision shall be severed and the remaining provisions shall continue in full force and effect.

12. NOTICE PROCEDURE FOR ALLEGED COPYRIGHT INFRINGEMENT (DMCA)

Designated Agent
Name: DMCA Compliance Officer
E‑mail: please check for domain abuse email from whois (for legal notices only)
Mailing Address: P.O. Box 000, City, State/Province, Postal Code, Country

To submit a DMCA takedown request, please provide the following:

  1. Identification of the copyrighted work claimed to have been infringed.
  2. Identification of the material that is claimed to be infringing or the subject of infringing activity, including the URL(s) where the material is located.
  3. Sufficient information to allow the Site to contact you (name, mailing address, telephone number, and e‑mail address).
  4. A statement that you have a good‑faith belief that use of the material is not authorized by the copyright owner, its agent, or the law.
  5. A statement, under penalty of perjury, that the information in the notice is accurate and that you are authorized to act on behalf of the copyright owner.
  6. Your physical or electronic signature.

13. ENTIRE AGREEMENT

This Disclaimer constitutes the entire agreement between you and the Site Parties with respect to the subject matter herein and supersedes all prior or contemporaneous communications and proposals, whether electronic, oral, or written, between you and the Site Parties regarding your use of the Site.

14. NO LEGAL ADVICE

The information presented on the Site—including, without limitation, this Disclaimer—is provided for general informational purposes only and does not constitute, and shall not be relied upon as, legal advice. You should consult a qualified attorney in your jurisdiction for advice on any specific legal issues that may arise from your use of software or hardware products.

15. CONTACT INFORMATION

For questions concerning this Disclaimer, technical inquiries, or general correspondence, please contact: [email protected]. Please do not send legal or DMCA notices to this address; such notices will not be considered valid unless submitted in accordance with Section 12 above.

By continuing to access or use the Site, you acknowledge that you have read, understood, and agreed to be bound by this Disclaimer. If you do not agree, you must immediately cease all use of the Site.